Product Overview
Package contains the Kemper Profiler Head in white (non-powered version) and Kemper Remote with included cable.
KEMPER PROFILER HEAD
“Profiling” is the name Kemper have given their proprietary technology that captures the sound and feel of a tube amplifier. The resulting profiles go far beyond a list of static, digital amp models - profiling creates a vivid, dynamic and multi-dimensional reproduction of your existing tube amp.
Profiling an amp is as simple as plugging it in and pressing “record.” Just insert it into the recording chain, sit back, and watch the magic. Test signals will be sent from the unit into your tube amp and recorded by the microphone in front of your cabinet. Less than a minute later, the sonic DNA of your tube amp has been extracted.
Use the A/B mode to compare the original tube amp with the profiled sound. The “Refine“ feature lets you fine-tune the nuances of your profile by simply strumming a few chords – a fast and convenient way to tweak the profile to perfection.
The four stomp slots let you choose from traditional drive pedals, wahs and EQs, as well as more exotic effects like frequency shifter and wave shaper. Post-amp, you can add up to four stereo effects, including various reverbs, delays and modulation effects. Many effects have a built-in “Ducking“ parameter – just find your perfect setting, then store it for easy recall as an effect preset.
KEMPER REMOTE
The Profiler remote: One to rule them all – Rigs, FX and much more
Well designed in a sturdy metal housing complimenting the look and feel of the Profiler the Profiler Remote connects via an included 7 meter/ 21 feet long Ethernet cable and draws its power from the Profiler, no extra power supply needed. The Profiler Remote features 4 direct connectors to hook up your favorite pedals to control continuous controllers like WahWah, Gain, Volume, Delay Level, Delay Feedback, etc.
The buttons on the Profiler Remote provide direct access to 5 program patches (Rigs), patch bank up and down, permanent Tuner with three LEDs, 30 sec. stereo Looper, Tap Tempo that also drives the unique real time Beat Scanner and an all time direct access to effects assigned to the current patch with the dedicated Stomp FX Buttons. The current status is visually represented on the Remote’s display.
The versatile and unique Stomp FX Buttons
These four dedicated buttons can be freely assigned to switch on/ off stomps and effects. They can also trigger special features in certain effects. Their respective assignments and their on/off status are stored per Rig. Each button can also be assigned to multiple stomps and effects. Assigning the Stomp FX Buttons is simple and straightforward: Simply by pressing the Stomp Button on the Profiler and the respective button on the Remote simultaneously.
Connecting up to 4 expression pedals and/ or external switches
The Profiler Remote offers four TRS-sockets named to connect expression pedals. If there is the need for additional switches, mono and stereo switches can be used with these sockets, too.
The 30 second stereo LOOPER
The Looper Button activates the Profiler’s new Looper function for recording up to 30 seconds in stereo. When activated the Looper turns the Bank Up/ Down and Rig Buttons on the remote to versatile Looper controls:
The Profiler and the Profiler Remote communicate with each other via an ethernet cable. The cable included in the Profiler Remote package has been carefully selected, and is perfectly suited for this purpose. Kemper have included a Neutrik® etherCON® cable connector carrier which ensures a robust connection. For the use on bigger stages and using multiple Remotes for the Profilers it is possible to use additional powered Ethernet Hubs. This way, distances of more than 100m (300ft) can be bridged.
Direct Response Preset Switching
With the Profiler Remote Kemper have significantly accelerated the Rig switching time. What's even better: they managed to avoid the usual silent gap that happens when switching to the next sound and turn it into a smooth crossfade. In conjunction with the implicit spillover of delay and reverb the Profiler provides the smoothest sound switch transitions in the industry.
Controlling external MIDI Gear
With the Profiler Remote it is of course also possible to switch and control external MIDI Gear. Program changes executed with the Profiler Remote for example can be defined with a MIDI program change command that is sent to external MIDI gear simultaneously via the Profiler’s MIDI Out connector.
KEMPER PROFILER HEAD
“Profiling” is the name Kemper have given their proprietary technology that captures the sound and feel of a tube amplifier. The resulting profiles go far beyond a list of static, digital amp models - profiling creates a vivid, dynamic and multi-dimensional reproduction of your existing tube amp.
Profiling an amp is as simple as plugging it in and pressing “record.” Just insert it into the recording chain, sit back, and watch the magic. Test signals will be sent from the unit into your tube amp and recorded by the microphone in front of your cabinet. Less than a minute later, the sonic DNA of your tube amp has been extracted.
Use the A/B mode to compare the original tube amp with the profiled sound. The “Refine“ feature lets you fine-tune the nuances of your profile by simply strumming a few chords – a fast and convenient way to tweak the profile to perfection.
The four stomp slots let you choose from traditional drive pedals, wahs and EQs, as well as more exotic effects like frequency shifter and wave shaper. Post-amp, you can add up to four stereo effects, including various reverbs, delays and modulation effects. Many effects have a built-in “Ducking“ parameter – just find your perfect setting, then store it for easy recall as an effect preset.
KEMPER REMOTE
The Profiler remote: One to rule them all – Rigs, FX and much more
Well designed in a sturdy metal housing complimenting the look and feel of the Profiler the Profiler Remote connects via an included 7 meter/ 21 feet long Ethernet cable and draws its power from the Profiler, no extra power supply needed. The Profiler Remote features 4 direct connectors to hook up your favorite pedals to control continuous controllers like WahWah, Gain, Volume, Delay Level, Delay Feedback, etc.
The buttons on the Profiler Remote provide direct access to 5 program patches (Rigs), patch bank up and down, permanent Tuner with three LEDs, 30 sec. stereo Looper, Tap Tempo that also drives the unique real time Beat Scanner and an all time direct access to effects assigned to the current patch with the dedicated Stomp FX Buttons. The current status is visually represented on the Remote’s display.
The versatile and unique Stomp FX Buttons
These four dedicated buttons can be freely assigned to switch on/ off stomps and effects. They can also trigger special features in certain effects. Their respective assignments and their on/off status are stored per Rig. Each button can also be assigned to multiple stomps and effects. Assigning the Stomp FX Buttons is simple and straightforward: Simply by pressing the Stomp Button on the Profiler and the respective button on the Remote simultaneously.
Connecting up to 4 expression pedals and/ or external switches
The Profiler Remote offers four TRS-sockets named to connect expression pedals. If there is the need for additional switches, mono and stereo switches can be used with these sockets, too.
The 30 second stereo LOOPER
The Looper Button activates the Profiler’s new Looper function for recording up to 30 seconds in stereo. When activated the Looper turns the Bank Up/ Down and Rig Buttons on the remote to versatile Looper controls:
- Record/Play - to control recording, playback and overdubbing
- Stop - to interrupt recording, playback and overdubbing, to clear the loop
- Trigger - to start one playback cycle
- Reverse - to change direction of recording, playback and overdubbing
- Halftime - to change speed of recording, playback and overdubbing
- Undo/Redo - to discard or recover last track
The Profiler and the Profiler Remote communicate with each other via an ethernet cable. The cable included in the Profiler Remote package has been carefully selected, and is perfectly suited for this purpose. Kemper have included a Neutrik® etherCON® cable connector carrier which ensures a robust connection. For the use on bigger stages and using multiple Remotes for the Profilers it is possible to use additional powered Ethernet Hubs. This way, distances of more than 100m (300ft) can be bridged.
Direct Response Preset Switching
With the Profiler Remote Kemper have significantly accelerated the Rig switching time. What's even better: they managed to avoid the usual silent gap that happens when switching to the next sound and turn it into a smooth crossfade. In conjunction with the implicit spillover of delay and reverb the Profiler provides the smoothest sound switch transitions in the industry.
Controlling external MIDI Gear
With the Profiler Remote it is of course also possible to switch and control external MIDI Gear. Program changes executed with the Profiler Remote for example can be defined with a MIDI program change command that is sent to external MIDI gear simultaneously via the Profiler’s MIDI Out connector.
