Product Overview
5 different REVERB types. Store and recall up to 5 presets.
Dual Footswitch, stereo input and output, storable presets and a myriad of adjustable parameters make the Twin series appealing to musicians from all different walks of life. Due to their flexibility and wide range of possibilities they can fit in well with all kinds of rig setups.
Moving into the realm of higher fidelity effects, the twin series uses floating-point DSP chips, which can handle very complex algorithms so that the overall tone is significantly improved over our previous digital pedals.
Product Features
Rich combined tones:
Reverie Reverb is a new member of Mooer Twin Series, equipped with 5 unique basal reverb tones---- Reverb, Plate, Shimmer, Octave and Modulation. Each could be fit for the Wah, Low-Pass, Flanger, Tremolo and Water effect respectively. You can also adjust the modulation effect into OFF to get pure reverb tone.
Stereo input and output:
Reverie Reverb has both dual-input and dual-output, which could connect other stereo equipments conveniently with professional stereo reverb sound. What’s more, there is a Pan Mod knob on the panel board. When pushing down the Pan Mod knob, you could get more spacious phase effect in the stereo mode.
Great range of adjustment:
Above the reverb knob and modulation knob on the panel board, there are respectively 3 knobs to control the parameters of reverb and modulated effects. TONE, DECAY, MIX respectively controls the tone, decay and ratio of reverb effect; and SPEED, RANGE, DEPTH respectively controls the rate, range and depth of modulated effect. They have so great adjustment range that different combination of the position could even make you believe that you’ve pushed down another pedal.
Tone storage function:
Reverie Reverb has 5 preset tones, where you can store your favorite and common tones through the Store knob. When you’ve got the tone you want, push the Store Knob. Then the Preset indicator light begins flashing. After choosing the preset tones through footswitch, push the Store Knob again and the preset light will flash twice quickly, which indicates the tone has been stored successfully. If you don’t need it, just click any knob before the last move of pushing Store Knob to get out of the storage mode.
Tap Tempo:
Tap Tempo could adjust the rate of effect sound during a live show, more convenient than the knob operation. In the Shimmer and Octave mode, push down the Tap Tempo footswitch and spin TONE/PARAM X knob can change the intensity of the Shimmer and Octave effects.
Tones Description
REVERB
Reverb: the natural reverb effect is able to change from ROOM to HALL through adjusting the depth of parameters.
Plate: Simulating the plate reverberation.
Shimmer: Added some more reverb types based on the normal reverb, with luxuriant overtones and nearly perfect spaciousness.
Octave: Add the octave effect.
Modulation: Add the modulation effect.
MODULATION
Wah: Add wah effect
Low-Pass: Add the low-pass filter effect
Flanger: Add the flanger effect
Tremolo: Add the tremolo effect
Water: Add a special phase effect
FEATURES
- The high quality DSP chip makes sure the high quality of reverb sound
- Five reverb modes --- each could be mixed with five different modulation effects
- The preset function: it is convenient to preset five reverb sounds you like
- Special Pan Mod function: to enjoy the acoustic image changing effect of the stereo
- The design of double footswitches makes it easier to change the tones, which is convenient for the live show
- Tap Tempo function: makes it much easier to adjust the rate
- Two-channel stereo for input and output connectors
SPECIFICATIONS
Input: Monaural jack (impedance: 1Meg Ohms)
Output: Monaural jack (impedance: 100 Ohms)
Sampling rate: 44.1k
Sampling precision: 32bit
Power requirements: AC adapter 9V DC (center minus plug) - NOT INCLUDED
Current Draw: 130mA
Dimensions: 106mm(D) x 96mm(W) x 53mm(H)
Weight: 450g
