Product Overview

Includes Cable, Windscreen and Hanging Adapter

The VCM 3 is a low-profile microphone designed primarily to be suspended above choirs, ensembles or stage areas for sound reinforcement with virtually no visual distraction.

The back-electret condenser capsule offers a smooth, tailored frequency response with a cardioid pickup pattern that is highly effective in suppressing feedback and unwanted noise.

The hanging adapter is a flexible, steel-spring wire used to facilitate positioning of the VCM 3 when suspended by its cable. The VCM 3 comes with a 33' (10 m) small-diameter cable, allowing it to remain as inconspicuous as possible.

This rugged, durable cable will fully support the VCM 3 and its hanging adapter. This cable connects to a compact output module. The output module also adapts the smaller QG-type connector to the typical three-pin XLR for use with a standard microphone cable.

This adapter operates on phantom power supply DC voltages between 9 – 52 volts.

Features:

Miniature, cardioid pattern, choir microphone
Back-electret condenser element
9-52 Volt phantom power
Includes 10-meter slim profile microphone cable, windscreen, and wire-form hanging adapter
Weight Unpacked: 0.60 lb (0.27 kg)
Weight Packed: 0.86 lb (0.39 kg)
Width Packed: 4.5" (11.43 cm)
Height Packed: 9.5" (24.13 cm)
Depth Packed: 3.25" (8.255 cm)

Type:
Back-electret condenser microphone
Pickup pattern:
Cardioid
Frequency response:
50 Hz to 20 kHz
Sensitivity:
-45 dB/Pa
Rated impedance:
250 Ohms
Minimum load impedance:
1k Ohms
Maximum SPL:
140 dB

S/N ratio: 69 dB
Dynamic range: 115 dB
Power supply: 9~52V
Current consumption: 3 mA
Connector: Mini three-pin XLR (QG) connector
Dimensions: Top diameter 0.47" (12mm) x 33' (10m) cable
Net weight: 4.59 oz. (130 g)